Tacx Neo 2t Smart Trainer Cod.t2875.61 - Interactive Training Rollers

IMPROVE YOUR INDOOR TRAINING TO LEVELS NEVER SEEN

With an optimized design and renewed components, NEO 2T Smart provides a more immersive experience, greater compatibility with pedaling analysis and much more.

Greater stability means a quieter ride. So keep going, don't give up

It's important to you. That's why we measure parameters like power and cadence with an accuracy of 1%.

Balanced pedals? View your riding stats on the app or Edge® cycle computer

It is the tool that allows you to pedal indoors as if you were outdoors

You will no longer have to give up the feeling of the road. It has arrived

THE SOUND OF SILENCE

The redesigned magnets allow for a significant improvement in the stability of the NEO 2T Smart. Air movement and internal vibrations are reduced, resulting in an extremely quiet trainer

A MORE COMFORTABLE RIDE

NEO 2T Smart reacts instantly to changes in speed or inclination and allows movement left and right while pedaling, following the natural trajectory of the body.

DYNAMIC INERTIA

Designed to simulate an outdoor ride, Dynamic Inertia controls mass inertia and compensates for it based on weight, speed and lean angle to make your ride as realistic as possible.

FEELING OF PEDALING ON THE ROAD

This function is compatible with the Tacx software or the Zwift app to produce trainer vibrations and simulate the sensation of pedaling on different road surfaces, such as cobblestone and gravel.

MAXIMUM INVOLVEMENT

When connected to an external power source, the downhill simulation accurately mimics real downhill pedaling.

OPTIMIZED PEDALING ANALYSIS

Adding cycling dynamics with standard ANT+® connectivity, NEO 2T Smart analyzes your pedal stroke via third-party software, including software on our Edge® cycle computers

DESIGNED FOR POWER

NEO 2T Smart features a new motor design that delivers more power at low speeds, with highly improved pedal feel when climbing or accelerating.

READY TO SPRINT

The 32 neodymium magnets allow for high braking force and high power levels. NEO 2T Smart guarantees maximum stability, even during the most explosive sprints, up to 2,200 watts.

PEDAL HIGHER

Get the most out of your most intense workouts by training on realistically simulated climbs up to a 25% gradient.

PRECISE AND RELIABLE

Track your performance and progress with reliable, consistent measurements, no need for calibration. Includes power, speed and cadence, measured to within 1% accuracy.

HIGHLY COMPATIBLE

NEO 2T Smart communicates via Bluetooth® Smart technology and the ANT+® FE-C protocol, so it is compatible with a number of popular training apps, such as TrainerRoad and Zwift.

AUTONOMOUS MODE

You can use the trainer in stand-alone mode. When not connected, it simulates a flat road; the faster you pedal, the greater the resistance.

DEVICE COMPATIBILITY

Connect NEO 2T Smart to multiple devices simultaneously to use Tacx software and track your performance on your Garmin cycle computer at the same time.

TACX TRAINING SOFTWARE

Enjoy a comprehensive set of over 100 high-quality videos, allowing you to experience the rush of the steep peaks of the Alps or the cobbled streets of Milan.

TACX TRAINING PLANS

Benefit from structured training plans, designed for your fitness level to help you reach your goals. Race against opponents in real time, upload GPS data, ride with 3D maps and much more.

TECHNICAL SPECIFICATIONS:

General

• DIMENSIONS; 22.6" x 29.5" (575 x 750 mm)
• WEIGHT; 47.4 lbs (21.5 kg)
• HEIGHT: 21.7" (55cm)

Connectivity

• WIRELESS COMMUNICATION;

  ANT+ connectivity, BLUETOOTH wireless technology

• CONTROL VIA: Smartphone, tablet, ANT+ cycle computer, autonomous, connection to computer via ANT+ antenna
• READING ON: Smartphone, tablet, cycle computer, computer with ANT+ antenna
• CONNECTION INDICATOR (ANT+/BLUETOOTH): 2 LEDs
• POWER INDICATOR; Multicolor LED, ground light point:

Indoor training features

• ELECTRICAL REQUIREMENTS; 110-240 Volts
• SUITABLE AXLES; Rear fork width: Travel 130mm, MTB 135mm, 142mm and 148mm. Adapter for 135 x 10 mm available
• GEAR RATIO; Chain Configuration: Up to 3 sprockets, teeth per sprocket, adjustable between 22 and 53; Rear cassette: up to 12 sprockets, teeth per sprocket adjustable between 11 and 40.
• Q-FACTOR; 147 mm
• MAXIMUM POWER; 2200 watts
• MAXIMUM INCLINATION; 0
• DESCENT SIMULATION; YES
• MAXIMUM TORQUE; 88 Nm
• MAXIMUM BRAKING FORCE; 260 No
• THEY FLY; Virtual
• MASS INERTIA; Variable up to 275.6 lbs (125 kg)
• CALIBRATION; No calibration is necessary
• EXIT; speed - cadence - power
• PRECISION; < 1%
• MEASURED SPEED; Yes
• MEASURED CADENCE; Yes
• MEASURED POWER; Yes
• Electrical requirements; 110-240 Volts
• Power indicator; Multicolor LED, ground light point
• Connection indicator (ANT+/BLUETOOTH): 2 LEDs
• Combination ratios; Crankset configuration: up to 3 chainrings, starting from 22 up to 53 teeth; Rear cassette: up to 12 sprockets, starting from 11 up to 40 teeth.
• Q-factor ; 147 mm
• Maximum power; 2200 watts
• Maximum inclination; 25%
• Descent simulation; YES
• Maximum torque; 88 Nm
• Maximum braking force; 260 No
• They fly; virtual
• Mass inertia; Variable up to 125 kg
• Calibration; No calibration necessary
• Encumbrance; 575 x 750 mm
• Height; 55 mm
• Weight; 21.5kg
• Wireless communication; ANT+ connectivity, Bluetooth wireless technology
• Control via; Smartphone, tablet, ANT+ cycle computer, standalone, connection to the computer via ANT+ antenna
• Exit; Speed, cadence, power
• Reading about; Smartphone, tablet, cycle computer, computer with ANT+ antenna
• Precision; < 1%

CONTENT

- Smart Trainer NEO 2T

- Front wheel support

- Quick release for road bikes and mountain bikes (5mm)

- Direct drive quick release with adapter set (142 x 12mm and 148 x 12mm)BR>

- Tacx Premium software for 1 month