The Triken 380 Revolution is an evolution of the 405 model, which it replaces.
This kayak is designed for use at sea, with an extremely streamlined and raised bow. It has double water outflow channels that divert the flow of water taken from the bow outwards, preventing access to the feet.
As regards the floor (the walking area), there are 3 different levels in order to eliminate any accumulation of water and direct it towards the external drainage holes.
The standard seat is made of 25 mm tubular aluminium, covered with high-tenacity, tear-resistant and water-repellent Cordura fabric. The standard seat, 25 cm high, is anchored on aluminum bars placed on the second level of the floor, thus ensuring uniform weight distribution on the aluminum accessories rather than on the plastic.
Legroom is ample, with molded storage compartments to both the right and left of the person, designed to hold bait boxes.
Under the seat there is a lever that activates the opening of the probe holder drawer (up/down), which is generously sized (32 x 12 cm) to accommodate even large echo sounder probes. The up-and-down system allows you to lift the drawer easily.
(it is pre-drilled for GT20 and GT52 Garmin probes, for other brands it is sufficient to make the holes depending on your probe)
The up-and-down system allows you to install side view probes to see laterally.
The kayak is equipped with slide bars located along its entire length, including two central supports with a traction capacity of 200 kg each, for mounting various accessories from the Railblaza catalogue, such as rod holders, GoPro mounts, cup holders, displays, lights, and more.
The cable duct for the passage of the probe cables and the power supply for the depth sounder is present as standard. The kayak offers a double battery compartment, one internal and one external, with lithium battery and USB port with A and C inputs, equipped with a display for viewing the voltage, all included in the standard equipment.
The front locker has the classic shape of Triken kayaks and can be customized in color and elastics. Inside the bow peak there is an additional hull inspection compartment. The kayak is equipped with 9 anti-slip pads distributed over the entire surface.
A fish-sized “cue” (removable) located behind the seat is included as standard, as well as a rigid clip-on side paddle holder. The central locker is rectangular and has an intermediate plastic box, with access to the USB port, easily reachable by turning your shoulders.
In the middle of the kayak there are two round inspection lockers, one on the right and one on the left, easily accessible by the person. The loading area is equipped with anti-slip pads. The rear floor is completed by the 4 sliding bars, useful for mounting further accessories, but also the retractable trolley with built-in wheels. (optional trolley)
As regards handling on land, visible and "hidden" handles have been designed, both under the bow and at the rear, to facilitate lifting and unloading the kayak
from the roof of the car.
The trimaran bottom, characteristic of all Triken models, gives the 380 exceptional stability, also allowing standing fishing.
Direction is managed by a large rear rudder, controlled by a lever located on the left side of the kayak. Furthermore, the Triken 380 has a removable skeg (drift), controlled by a lever located outside the seat, which represents a distinctive accessory of this model.
Finally, the bumpers, although made of sturdy material, are easily replaced by unscrewing the bolts. It is possible to choose between 3 different types of rudders when ordering: Rudder A (with partial closure, length 47 cm), Rudder B (with 270° closure, length 44 cm) and Rudder C (with new closing system, length 53).
The Triken 380 is also prepared (as standard) for mounting a stern motor (TORQEEDO ULTRALIGHT), a bow motor (via an optional pulpit) and a central motor in place of the pedals (via an optional motor mount) .
The standard equipment also includes 2 Railblaza adjustable rod holders and 2 internal rod holders. The optional Big Mama 29 liter livewell accessory can be fitted to the Triken 380.
Finally, it should be noted that the Triken 380 is fitted as standard with 65 M6 bushings embedded in polyethylene, each with a traction capacity of 200 kg.
Each Triken 380 is equipped with an identification plate with serial number.
As with any Triken, the great advantage is to purchase a handcrafted product and above all made in Italy, where maximum customization is possible, from the colors of the hull, the locker lid and the accessories.
If desired, it is possible to visit the production by making an appointment (0775871479) to view and choose the best desired configuration
Triken 380 rev. - Design registered on 02/11/2023
Design developed by Claudio Campioni Frosinone
TECHNICAL FEATURES:
LENGTH 380 CM
WIDTH 92 CM
HEIGHT CM: 37 (BOW), 33 (CENTRE) 30 (STERN)
WEIGHT 39 KG HULL ONLY – 51 KG ASSEMBLED
2 ADJUSTABLE RAILBLAZA ROD HOLDERS AS STANDARD
2 INTERNAL ROD HOLDERS AS STANDARD
1 CENTER RECTANGULAR LOCKER WITH INTERNAL TRAY
4 INSPECTION LOCK
1 FRONT LOCKER WITH COVER IN COLOR OF YOUR CHOICE
10 30 CM RAILBLAZA BARS
2 10 CM RAILBLAZA BARS
1 SKEG with right side control
1 RIGID PADDLE HOLDER
1 SET OF LOWER BUMPERS
1 SLIDING DRAWER FOR PROBE
2 BATTERY COMPARTMENTS
1 LITHIUM BATTERY AS STANDARD
1 PORT WITH DOUBLE USB INPUT AND VOLT DISPLAY
1 SET OF ANTI-SLIP PAD
PREPARATION FOR STERN, BOW AND CENTRAL ENGINE MOUNTING
1 SIDE MESH POCKET
PREPARATION FOR PASSAGE OF DEPTH SOUNDER CABLES
1 BITTA
1 FISH LENGTH MEASURING SPADE
1 RUDDER (choose between models A, B and C)
1 PADDLE INCLUDED
1 PEDAL SYSTEM, INCLUDED
1 RAISED SEAT H 25 CM IN ALUMINUM AND CORDURA FABRIC (MADE
IN ITALY)
We reserve the right to make changes and improvements without notice