Hit marker device for fencing - Wall version Cod.full-arm-01/w Art.825

Technical features:

• According to FIE standards. However, the white lamps are made up of groups of yellow LEDs in order to obtain a better quality and low consumption product.

• Control of the 3 weapons.

• Easy program update with the replacement of just one electronic component.

• Selectable manual or automatic reset: 1, 3 or 5 seconds.

• Sound volume variable on 2 levels: high and low.

• Light test function and correct functioning of the weapons circuits.

• Diet: 12Vac or 12Vdc, 400mA.

• Low consumption: 0.07A + 0.08A for each lamp switched on at 12Vdc.

• Ideal to be powered by a small 6-7 Ah rechargeable lead acid battery. In this case its autonomy, with a light always on, is approximately 40 hours. The device signals when the battery needs recharging or in any case if the supply voltage is lower than 11VDC. This control is very useful to prevent excessive discharge from deteriorating the battery. Are available batteries (Art.828) and battery charger ( Art.169 ).

• The lights are all made up of groups of LEDs (typical life: 100,000 hours!). This eliminates the usual lamps and their replacement problems.

• The 4 lights, the green, the red and the 2 white are made up of groups of 20 LEDs each, green, red and yellow respectively. The yellow lamps that signal power losses are displayed with 2 yellow LEDs each.

• It has 2 DATA-LINE sockets for connecting 2 LIGHTS REPEATER light repeaters. These connections are electrically isolated using optocouplers for greater safety. If you need to control high power lights, special controllers ( CONTROL-LAMP ) can be connected.

• The membrane keyboard is robust, reliable (5 million contacts) and resistant to dirt and liquids.

• The shockproof plastic container is resistant to the violent blows of weapons. The lights are also equally protected.

• The wall version is particularly suitable for fixed systems in fencing clubs. It has a terminal block for direct connection of weapons and power. Wall fixing is simple and immediate using 2 front screws. The light repeater can be fixed on the opposite wall LIGHTS REPEATER . Both have the same aesthetics, pleasant and take up little space with their thickness of only 4 cm. The connection between the FULL-ARM-01 and the LIGHTS REPEATER occurs via a common 4-wire telephone cable which can be up to 100 meters long. The room system thus becomes very simple and economical.

• Warranty: 2 years.